TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

  TM-9-2320-328-13-P-2 - Page 324 of 1390

TM 9-2320-328-13&P-2
0133-2
DRAFT
0133
INSTALLATION
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
1.
Apply pipe thread sealing compound to threads of fan switch (10).
2.
Install fan switch (10) on hydraulic heat exchanger (11).
3.
Install fan switch connector (2) and cushion clip (6) on side shroud C (8) and rear shroud B (9) with screw (7),
two washers (5), lockwasher (4), and nut (3).
4.
Connect pump house wire harness connector (1) on fan switch connector (2).
END OF TASK
FOLLOW-ON MAINTENANCE
Install pump house panel K (WP 0339)
END OF TASK
END OF WORK PACKAGE
HWT2769
WARNING
ICON 30, 44, 27


Back to Top