TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 329 of 1390

TM 9-2320-328-13&P-2

0134-5

DRAFT

0134

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

13. Remove four nuts (33), lockwashers (34), eight washers (35), four screws (36), and bracket (37) from four

brackets (13).

Discard lockwashers.

NOTE

Note position and orientation of brackets prior to removal to ensure proper installation.

14. Remove eight nuts (38), lockwashers (39), 16 washers (40), eight screws (41), and four brackets (13) from

hydraulic heat exchanger (19).

Discard lockwashers.

END OF TASK

INSTALLATION

NOTE

Install brackets on hydraulic heat exchanger as noted prior to removal.

1.

Install four brackets (13) on hydraulic heat exchanger (19) with eight screws (41), 16 washers (40), eight

lockwashers (39), and nuts (38).

2.

Install bracket (37) on four brackets (13) with four screws (36), eight washers (35), four lockwashers (34), and

nuts (33).

HWT2464