TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 327 of 1390

TM 9-2320-328-13&P-2

0134-3

DRAFT

0134

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Hydraulic heat exchanger weighs 85 lb. (38.56 kg).

Do not attempt to remove

hydraulic heat exchanger without the aid of an assistant and a suitable lifting

device.

Failure to comply may result in serious injury to personnel and damage to

equipment.

5.

With the aid of an assistant and a suitable lifting device, remove five nuts (15), lockwashers (16), 10

washers (17), five screws (18), and hydraulic heat exchanger (19) from pump house frame (14).

Discard

lockwashers.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.

Remove fitting (20) and preformed packing (21) from hydraulic heat exchange (19).

Discard preformed

packing.

7.

Remove fitting (3) and preformed packing (22) from fitting (20).

Discard preformed packing.

HWT2467

WARNING

ICON 7

HWT1974