TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 64 of 1390
TM 9-2320-328-13&P-2
0116-4
DRAFT
0116
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3176
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 8.
Remove driver side rear light bezel cover (WP 0335).
Disconnect driver side body wire
harness clearance light connector.
With a test lead set, check for 22 to 28 VDC
between wire 1606 (green) at driver side body wire harness clearance light connector
terminal and a known good ground.
.
If 22 to 28 VDC are not present, go to Step 10.
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
