TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009
TM-9-2320-328-13-P-2

  TM-9-2320-328-13-P-2 - Page 73 of 1390

TM 9-2320-328-13&P-2
0116-13
DRAFT
0116
Change 1
.
HWT0621
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 26.
Disconnect cab instrument panel wire harness cab power distribution wire harness
connector.
With a test lead set, check for 22 to 28 VDC between cab instrument panel
wire harness wire H012 (white) at cab power distribution wire harness connector,
terminal 14 and a known good ground.
.
a.
If 22 to 28 VDC are present, repair wire H012 in cab power distribution
wire harness if repairable (TM 9-2320-325-14&P), or replace cab
power distribution wire harness and block (WP 0280).
.
b.
If 22 to 28 VDC are not present, repair wire H012 in cab instrument
panel wire harness if repairable (TM 9-2320-325-14&P), or replace cab
instrument panel wire harness (WP 0279).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top