TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 68 of 1390
TM 9-2320-328-13&P-2
0116-8
DRAFT
0116
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3180
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 17.
Disconnect main wire harness passenger side body wire harness connector.
With a
test lead set, check for 22 to 28 VDC between wire 1606 (green) at main wire harness
passenger side body wire harness connector, terminal H and a known good ground.
.
a.
If 22 to 28 VDC are present, repair wire 1606 in passenger side body
wire harness if repairable (TM 9-2320-325-14&P), or replace
passenger side body wire harness (WP 0298).
.
b.
If 22 to 28 VDC are not present, repair wire 1606 in main wire harness
if repairable (TM 9-2320-325-14&P), or replace main wire harness
(WP 0292).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
