TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009
TM-9-2320-328-13-P-2

  TM-9-2320-328-13-P-2 - Page 77 of 1390

TM 9-2320-328-13&P-2
0116-17
DRAFT
0116
Change 1
.
HWT1030
.
Step 32.
Remove skid plate grille (WP 0349).
Pull battery disconnect switch to off position
(WP 0007).
Disconnect main wire harness main 2 connector.
With a test lead set,
check for continuity across wire 1411 (yellow) from main wire harness main 2 connector,
terminal P to left side clearance/turn connector, terminal 3.
.
a.
If there is continuity, repair wire 1411 in cab instrument panel wire
harness if repairable (TM 9-2320-325-14&P), or replace cab instrument
panel wire harness (WP 0279).
.
b.
If there is no continuity, repair wire 1411 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire harness
(WP 0292).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top