TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 83 of 1390
TM 9-2320-328-13&P-2
0116-23/(24 blank)
DRAFT
0116
Change 1
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
.
HWT0629
.
Step 41.
Remove skid plate grille (WP 0349).
Turn Service Drive Lights Off (TM 9-2320-422-10).
Pull battery disconnect switch to on position (WP 0007).
Disconnect main wire harness
main 2 connector.
With a test lead set, check for continuity across wire H012 (white)
from main wire harness main 2 connector, terminal A to side clearance/turn light
connector, terminal 2.
.
a.
If there is continuity, repair wire H012 in main wire harness if repairable
(TM 9-2320-325-14&P), or replace main wire harness (WP 0292).
.
b.
If there is no continuity, repair wire H012 in cab instrument panel wire
harness if repairable (TM 9-2320-325-14&P), or replace cab instrument
panel wire harness (WP 0279).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
