TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 92 of 1390
TM 9-2320-328-13&P-2
0117-8
DRAFT
0117
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3194
.
Step 7.
Turn Service Drive Lights Off (TM 9-2320-422-10).
Pull battery disconnect switch to off
position (WP 0007).
Remove skid plate grille (WP 0349).
Disconnect main wire
harness main 1 connector.
With a lead test set, check for continuity across main wire
harness wire 1188 (red) from main wire harness main 1 connector, terminal 10 to main
wire harness driver side body wire harness connector, terminal J.
.
a.
If there is continuity, repair wire 1188 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0280).
.
b.
If there is no continuity, repair wire 1188 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire harness
(WP 0292).
.
Step 8.
Check if both driver side stowage hatch T3 striplight operate.
.
If both driver side stowage hatch T3 lights do not operate, go to Step 11.
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
