TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 101 of 1390

TM 9-2320-328-13&P-2

0117-17/(18 blank)

DRAFT

0117

Change 1

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install skid plate grille if removed (WP 0349)

2.

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 19.

Cut driver side body wire harness stowage compartment striplight butt splice connector.

Push battery disconnect switch to on position (WP 0007).

Turn Service Drive Lights On

(TM 9-2320-422-10).

Check for 22 to 28 VDC between wire 1188 (red) at driver side

body wire harness stowage compartment striplight butt splice connector and a known

good ground.

.

a.

If 22 to 28 VDC are present, replace stowage compartment D1

striplight (WP 0215).

.

b.

If 22 to 28 VDC are not present, repair wire 1188 in driver side body

wire harness if repairable (TM 9-2320-325-14&P), or replace driver

side body wire harness (WP 0286).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION