TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 96 of 1390
TM 9-2320-328-13&P-2
0117-12
DRAFT
0117
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3317
.
Step 13.
Disconnect driver side wire harness 4-pin connector (WP 0246).
With a test lead set,
check for continuity across wire 2460 (black) from driver side wire harness 4-pin
connector, terminal 12 to a known good ground.
.
a.
If there is continuity, repair wire 2640 in upper driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
wire harness (WP 0286).
.
b.
If there is no continuity, repair wire 2640 in lower driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
wire harness (WP 0286).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
