TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 94 of 1390
TM 9-2320-328-13&P-2
0117-10
DRAFT
0117
Change 1
.
HWT2884A
.
Step 10.
Turn Service Drive Light Off (TM 9-2320-422-10).
Pull battery disconnect switch to off
position (WP 0007).
With a test lead set, check for continuity across wire 1474 from
driver side body wire harness driver side hatch striplight connector, terminal B to a
known good ground.
.
a.
If there is continuity, replace non-operating driver side stowage hatch
striplight (WP 0215).
.
b.
If there is no continuity, repair wire 1474 in upper driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0286).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
