TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 88 of 1390
TM 9-2320-328-13&P-2
0117-4
DRAFT
0117
Change 1
.
HWT1045
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 3.
Put EMERG MASTER and F/R LOWER WARNING switches to off position (WP 0004).
Turn Service Drive Lights Off (TM 9-2320-422-10).
Pull battery disconnect switch to off
position (WP 0007).
Remove circuit breaker FS 9 (WP 0242).
Check for continuity
across circuit breaker terminal connectors.
.
If there is no continuity, replace circuit breaker FS 9 (WP 0242).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
