TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 91 of 1390
TM 9-2320-328-13&P-2
0117-7
DRAFT
0117
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3193
.
Step 6.
Connect main wire harness driver side body wire harness connector.
Cut driver side
body wire harness stowage compartment striplight butt splice connector wire 1188
(red).
Push battery disconnect switch to on position (WP 0007).
Turn Service Drive
Lights On (TM 9-2320-422-10). Check for 22 to 28 VDC between wire 1188 (red) at
driver side body wire harness stowage compartment striplight connector and a known
good ground.
.
a.
If 22 to 28 VDC are present, repair wire 2640 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0286).
.
b.
If 22 to 28 VDC are not present, repair wire 1188 in driver side body
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0286).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
