TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 74 of 1390
TM 9-2320-328-13&P-2
0116-14
DRAFT
0116
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3183
.
Step 27.
Remove skid plate grille (WP 0349).
Disconnect main wire harness main 1 connector.
With a test lead set, check for continuity across wire 1606 (green) from main wire
harness main 1 connector, terminal 9 to rear center lower clearance light connector
terminal.
.
a.
If there is continuity, repair wire 1606 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0280).
.
b.
If there is no continuity, repair wire 1606 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire harness
(WP 0292).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
