TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 66 of 1390
TM 9-2320-328-13&P-2
0116-6
DRAFT
0116
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3178
.
WARNING
.
ICON 30, 44, 27
.
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
.
Step 13.
Remove passenger side light bezel cover (WP 0335).
Disconnect passenger side body
wire harness clearance light connector.
Check for 22 to 28 VDC between wire 1606
(green) at passenger side body wire harness clearance light connector, terminal and a
known good ground.
.
If 22 to 28 VDC are not present, repair wire 1606 in passenger side body
wire harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0298).
.
Step 14.
Turn Off Clearance Lamps (TM 9-2320-422-10).
Turn Service Drive Lights Off
(TM 9-2320-422-10).
Pull battery disconnect switch to off position (WP 0007).
With a
test lead set, check for continuity across wire 2740 (black) from lower passenger side
body wire harness at passenger side body wire harness clearance light connector to a
known good ground.
.
a.
If there is continuity, replace non-operating clearance light (WP 0229).
.
b.
If there is no continuity, repair wire 2740 in passenger side body wire
harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0298).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
