TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 502 of 764

TM 9-2320-361-34

15-44.

BRAKE, FEED, AND DRIVE CLUTCH MAINTENANCE

(Contd)

29. Remove cotter pin (28), nut (29), drive pinion (30), and woodruff key (39) from drive shaft (40).

Discard cotter pin (28) and woodruff key (39).

30. Tap shaft

(40) and remove from feed shaft (4).

NOTE

Perform steps 31, 35, and 36 if adjusting depth of feed pinion.

31. Tap feed

shaft (4) and remove from main support tube (6).

32. Remove feed pinion (34) with bearing (35), two washers (36), and spacer (37), and woodruff key (38)

from feed shaft (4). Discard woodruff key (38).

33. Remove spacer (37) and washer (36) from feed pinion (34).

34, Remove two bearings (31), spacer (32), and seal (33) from feed pinion (34). Discard seal (33).

35. Remove bearing (25) and shims (26) from main support tube (6). Record thickness of shims (26).

Discard shims (26).

3

15-191