TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 503 of 764

TM 9-2320-361-34

15-44. BRAKE, FEED, AND DRIVE CLUTCH MAINTENANCE (Contd)

b.

Inspection

1. For

general inspection instructions, refer to para. 2-9.

2. Inspect two sleeve bearings (10), two roller bearings (9), four bearings (12), and bearings (3) and (17)

(TM 9-214). Replace if damaged.

NOTE

Feed pinion gear or drive pinion gear must be replaced with associated

intermediate case ring gears as a matched set.

3. Inspect main drive gear (14), drive pinion (15), and feed pinion (16) for burrs, nicks, chips, cracks,

and damaged teeth. Small nicks or burrs can be removed with a fine mill file. Replace if damaged.

15-192