TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 117 of 1616

TM 9-2320-440-13&P

0016-15

0016

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

•

Visually check that main frame cylinders have completed full retraction. Failure to

comply may result in damage to equipment.

•

Reduce speed to idle in last 12 in. (31 cm) of main frame cylinder.

Failure to comply

may result in damage to equipment.

26.

Move joystick (6) to LOAD position and hold in this position until main frame cylinders are fully retracted.

CAUTION

Engine speed must be at idle before using hydraulic selector switch.

Failure to

comply may result in damage to equipment.

27.

Turn hydraulic selector switch (5) to MAN HOOK ARM position.

28.

Hold joystick (6) in LOAD position until the hook arm cylinders (7) are fully retracted.

29.

Release joystick (6).

WARNING

Never drive with LHS NO TRANSIT indicator light illuminated. An illuminated

indicator light means LHS is not fully stowed. The load could break loose. Failure to

comply may result in injury or death to personnel.

30.

Turn hydraulic selector switch (5) to MAN TRANSIT position.

31.

Move PTO ENGAGE switch (3) to OFF position. Make sure indicator light (4) is extinguished.

32.

Disconnect vehicle static reel clamp (15) from ground rod and stow ground rod driver (WP 0010).

33.

Disconnect MRP static reel clamp from ground rod (refer to THAAD Launcher IETM).

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

THAAD0270