TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 109 of 1616

TM 9-2320-440-13&P

0016-7

0016

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

23.

Release joystick (7).

24.

Set hydraulic selector switch (6) to MAN HOOK ARM position.

25.

Move joystick (7) to LOAD position until MRP is approximately 2 ft. (0.61 m) off the ground.

26.

Release joystick (7).

27.

Set hydraulic selector switch (6) to MAN MAIN FRAME position.

28.

Move joystick (7) to load position.

CAUTION

To avoid equipment damage, visually check that main frame cylinders do not

complete full retraction while operating at engine speeds above idle.

NOTE

Engine speed will require increasing and decreasing in the following steps.

29.

After MRP contacts rear rollers (10), increase engine speed to 1500 rpm until two main frame

cylinders (11) have nearly completed full retraction.

30.

Reduce engine speed to idle and continue loading until two main frame cylinders (11) are fully retracted.

31.

Release joystick (7).

THAAD0269

THAAD0268