TM 9-2320-440-13&P
0016-5
0016
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
WARNING
•
When loading or unloading MRPs on uneven ground (side slope or downgrades up
to 5 degrees), it may be necessary to apply vehicle service brakes to prevent
vehicle rollaway. Failure to comply may result in injury or death to personnel.
•
Prior to and during any load or unload cycle, all personnel should stay clear of LHS
and MRP.
Failure to comply may result in injury or death to personnel.
CAUTION
•
Ensure that parking brake is not applied before starting load sequence.
Failure to
comply may result in damage to equipment.
•
When loading or unloading a MRP, engine speed must be at 1500 rpm.
Failure to
comply may result in damage to equipment.
21.
Move joystick (7) to LOAD position, allowing vehicle to be pulled under MRP.
THAAD0280