TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010
TM-9-2320-440-13-P

  TM-9-2320-440-13-P - Page 104 of 1616

TM 9-2320-440-13&P
0016-2
0016
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3.
Set transmission range selector (1) to R (Reverse) and back vehicle up to MRP. Stop approximately 5 ft.
(1.5 m) from hook bar (2). Check for overhead obstructions and firmness of ground.
4.
Park vehicle (
5.
Ground vehicle (WP 0010).
6.
Connect vehicle static reel clamp to ground cable.
7.
Connect MRP static reel clamp to ground rod (refer to THAAD Launcher IETM)
8.
LHS will only operate when transmission range selector is in N (Neutral).
9.
Apply service brake pedal (3) and set transmission range selector (1) to N (Neutral).
CAUTION
•
Ensure that hook arm cylinders do not complete full extension while operating at
engine speeds above idle.
Failure to comply may result in damage to equipment.
•
Manual mode is only used in event of a failure of automatic control electrical
system.
Caution must be exercised during operation of MANUAL mode for correct
cycle of events to occur.
Failure to comply may result in damage to equipment.
10.
Move PTO ENGAGE switch (4) to ON position. Indicator light (5) is illuminate.
11.
Turn hydraulic selector switch (6) to MAN HOOK ARM position.
WARNING
•
Check for overhead power lines or other obstructions before attempting LHS
operation.
Failure to comply may result in injury or death to personnel.
•
Check ground conditions for firmness and extreme sideways inclination before
loading or unloading a MRP.
Failure to comply may result in injury or death to
personnel.
•
Prior to and during any load or unload cycle, all personnel should stay clear of LHS
and MRP.
Failure to comply may result in injury or death to personnel.
THAAD0283


Back to Top