TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 106 of 1616

TM 9-2320-440-13&P

0016-4

0016

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

•

Ensure parking brake is not applied during load sequence.

Failure to comply may

result in damage to equipment.

•

Do not use R (Reverse) to back up vehicle while hook arm is attached to MRP.

Failure to comply may result in damage to equipment.

NOTE

•

LHS will only operate when transmission range selector is in N (Neutral).

•

No additional equipment can be stowed on or in MRP during loading/unloading. Additional

equipment could overload LHS due to weight of MRP.

19.

Move joystick (7) to LOAD position to raise lift hook (9) and engage hook bar (2).

20.

If lift hook (9) fails to engage hook bar (2):

(a)

Release joystick (7).

(b)

Set transmission range selector (1) to D (Drive), release service brake pedal (3), and move vehicle

forward just clear of MRP.

(c)

Move joystick (7) to UNLOAD position until lift hook (9) is below level of hook bar (2).

(d)

Repeat steps (13) through (16).

THAAD0281