TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 115 of 1616

TM 9-2320-440-13&P

0016-13

0016

NOTE

When hook arm cylinders are fully extended and joystick activated, LHS OVERLOAD

indicator light will illuminate.

14.

Release joystick (6).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

•

Engine speed must be at idle before using hydraulic selector switch.

Failure to

comply may result in damage to equipment.

•

Ensure parking brake is released before starting the unload sequence.

Failure to

comply may result in damage to equipment.

15.

Turn hydraulic selector switch (5) to MAN MAIN FRAME position.

16.

Move joystick (6) to UNLOAD position.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

When loading or unloading MRP on uneven ground (side slope or down grades up

to 5 degrees), it may be necessary to apply vehicle service brakes to prevent

vehicle rollaway.

Failure to comply may result in injury or death to personnel.

17.

When back edge of MRP touches ground, release service brake pedal (1), allowing vehicle to be pushed

straight from under MRP.

18.

Continue unloading until front of MRP is within 8 in. (20.3 cm) of ground, decrease engine speed to idle,

and apply service brake pedal (1).

THAAD0273

THAAD0272