TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 116 of 1616

TM 9-2320-440-13&P

0016-14

0016

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

Once suspension has been relieved of flatrack load, do not continue in UNLOAD

position or rear of vehicle could jack up with hook arm.

Failure to comply may

result in damage to equipment.

19.

Continue unloading until MRP is on ground and rear suspension is unloaded.

20.

Release joystick (6).

NOTE

•

Engine speed is set at idle. However, slight increase in engine speed may be necessary

depending on terrain.

•

LHS will only operate when transmission range selector is in N (Neutral).

21.

Set transmission range selector (2) to D (Drive) and release service brake pedal (1).

22.

Move joystick (6) to LOAD position momentarily, and then to UNLOAD position to let hook arm (8)

disengage from MRP hook bar (9).

23.

Repeat step (19) until hook arm (8) disengages MRP hook bar (9).

24.

Move vehicle forward approximately 5 ft. (1.5 m).

25.

Stop vehicle and set transmission range selector (2) to N (Neutral).

THAAD0271