TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 157 of 552
OPERATOR MAINTENANCE
WHEEL ASSEMBLY REPLACEMENT
INITIAL SETUP:
Equipment Condition
Handbrakes applied (WP
0005)
WARNING
Trailer must be supported by blocking or support stands placed under axle or frame
throughout maintenance procedure. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
NOTE
•
This procedure shows replacement of the M116A2 wheel assembly.
•
Lug wrench and lifting device needed will come from prime mover.
REMOVAL
1.
Chock wheel assembly (Figure 1, Item 1) opposite side being removed.
1
M116_M101_123
Figure 1.
Wheel Assembly Removal.
TM 9-2330-202-13&P
0034
0034-1
Back to Top
