TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 216 of 552
CLEANING AND INSPECTION
WARNING
•
Solvent cleaning compound MIL-PRF-680 may be irritating to the eyes and skin. Use
protective gloves and goggles. First aid for skin contact: remove contaminated clothing.
Wash skin thoroughly with soap and water. First aid for eye contact: flush with water until
irritation subsides. If symptoms persist, seek medical attention. Failure to comply may
result in death or injury to personnel. Seek medical attention in the event of an injury.
•
Use solvent cleaning compound MIL-PRF-680 in a well ventilated area. Use respirator
as needed. Accidental ingestion can cause irritation of digestive tract and respiratory
tract. May cause lung and central nervous system damage. Can be fatal if swallowed.
Inhalation of high/massive concentrations can cause coma or be fatal. First aid for
ingestion: do not induce vomiting. Seek immediate medical attention. First aid for
inhalation: move to fresh air. If not breathing, provide artificial respiration. If symptoms
persist, seek medical attention. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
•
MIL-PRF-680 solvent is combustible; DO NOT use or store near heat, sparks, flame, or
other ignition sources. Use mechanical ventilation whenever product is used in a confined
space, heated above ambient temperatures, or agitated. Keep container sealed when
not in use. Failure to comply may result in death or injury to personnel. Seek medical
attention in the event of an injury.
•
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can
injure personnel and damage equipment. Failure to comply may result in death or injury
to personnel. Seek medical attention in the event of an injury.
•
Rags saturated with solvent cleaning compound must be disposed of IAW authorized
facility procedures. Failure to comply may result in death or injury to personnel. Seek
medical attention in the event of an injury.
•
Solvent cleaning compound MIL-PRF-680 is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes,
and clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive
heat. Failure to comply may result in death or injury to personnel. Seek medical attention
in the event of an injury.
1.
Clean all removed components with cleaning solvent and soft cloth rag and allow to dry.
2.
Inspect backing plate for cracks, breaks, corrosion, or other damage. Replace backing plate if damaged.
TM 9-2330-202-13&P
0045
0045-6
Back to Top
