TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 222 of 552

REMOVAL - Continued

1.

Unhook swaged sleeve (Figure 1, Item 2) from parking brake lever (Figure 1, Item 1).

2.

Remove five nuts (Figure 1, Item 4), cap screws (Figure 1, Item 6), and backing plate (Figure 1, Item 3) from

axle (Figure 1, Item 5).

1

1

2

2

3

4

5

6

M116_M101_081

Figure 1.

Backing Plate Removal.

END OF TASK

DISASSEMBLY

1.

Remove two spring clips (Figure 2, Item 9) and springs (Figure 2, Item 13).

2.

Remove cap (Figure 2, Item 5), nut (Figure 2, Item 15), washer (Figure 2, Item 16), pin (Figure 2, Item 8), and

brake lever (Figure 2, Item 7).

3.

Remove clip (Figure 2, Item 11), washer (Figure 2, Item 12), and brake shoe (Figure 2, Item 1). Discard clip

(Figure 2, Item 11).

4.

Remove clip (Figure 2, Item 2) and strut (Figure 2, Item 10). Discard clip (Figure 2, Item 2).

5.

Remove clip (Figure 2, Item 18), washer (Figure 2, Item 17), and brake shoe (Figure 2, Item 6). Discard clip

(Figure 2, Item 18).

6.

Remove four cap screws (Figure 2, Item 4) and brake guide (Figure 2, Item 14).

7.

Remove two brake guide washers (Figure 2, Item 3).

TM 9-2330-202-13&P

0046

0046-2