TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 225 of 552

CLEANING AND INSPECTION - Continued

1.

Clean all removed components with cleaning solvent and soft cloth rag and allow to dry.

2.

Inspect backing plate for cracks, breaks, corrosion, or other damage. Replace backing plate if damaged.

WARNING

If one brake shoe is being replaced, replace all brake shoes on axle. The combination of old

brake shoes with new brake shoes will cause uneven braking. Failure to comply may result

in death or injury to personnel. Seek medical attention in the event of an injury.

3.

Inspect brake shoe linings for cracks or grease. Measure lining thickness. Lining thickness must be at least

1/8 in (3.18 mm). Replace brake shoes if damaged, grease soaked, or worn.

4.

Inspect parking brake lever, strut, and brake guide for cracks or wear.

5.

Inspect all other removed components for cracks, breaks, distortion, corrosion, or other damage. Replace any

damaged components.

END OF TASK

TM 9-2330-202-13&P

0046

0046-5