TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 232 of 552
ADJUSTMENT - Continued
3.
Release handbrake on side being adjusted (WP
0005).
4.
While turning wheel assembly (Figure 2, Item 2), turn cam stud (Figure 2, Item 6) until brake drags. Turn cam
stud (Figure 2, Item 6) in opposite direction just enough to remove drag.
5.
Repeat Step 4 for other cam stud (Figure 2, Item 4).
6.
Remove button plug (Figure 2, Item 3).
7.
Loosen nut (Figure 2, Item 1) and turn eccentric pin (Figure 2, Item 7) until it binds. Tighten
nut (Figure 2, Item 1).
8.
Install button plug (Figure 2, Item 3).
9.
Lower axle (Figure 2, Item 5). Apply handbrake on adjusted side (WP
0005).
10.
Remove chock from wheel assembly (Figure 2, Item 2).
1
7
2
5
4
3
6
M116_M101_085
Figure 2.
Service Brake Adjustment.
END OF TASK
FOLLOW ON TASK
Adjust handbrakes (WP
0043).
END OF TASK
END OF WORK PACKAGE
TM 9-2330-202-13&P
0048
0048-2
Back to Top
