FIELD MAINTENANCE
HYDRAULIC BRAKE ACTUATOR ASSEMBLY REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's
(WP
0115, Table 1, Item 1)
Wrench, Torque (WP
0115, Table 1, Item 2)
Wrench, Torque (WP
0115, Table 1, Item 3)
Materials/Parts
Eight self-locking nuts
(WP
0091, Figure 10, Item 2)
Five self-locking nuts
(WP
0091, Figure 10, Item 13)
Self-locking nut (WP
0091, Figure 10, Item 14)
Self-locking nut (WP
0091, Figure 10, Item 16)
Gasket (WP
0091, Figure 10, Item 35)
Gasket (WP
0091, Figure 10, Item 38)
Four self-locking nuts
(WP
0097, Figure 16, Item 11)
Self-locking nut (WP
0097, Figure 16, Item 13)
Materials/Parts (cont.)
Self-locking nut (WP
0097, Figure 16, Item 15)
Four lockwashers (WP
0097, Figure 16, Item 27)
Brush, wire (WP
0114, Table 1, Item 4)
Detergent, general purpose
(WP
0114, Table 1, Item 8)
Degreasing solvent
(WP
0114, Table 1, Item 9)
Rag, wiping (WP
0114, Table 1, Item 24)
References
WP
0007
WP
0053
WP
0077
Equipment Condition
Handbrakes applied (WP
0005)
WARNING
•
When performing maintenance on brake system, make sure wheels are securely
chocked. Failure to comply may cause trailer to roll, resulting in death or injury to
personnel. Seek medical attention in the event of an injury.
•
Trailer must be supported by blocking or support stands placed under axle or frame
throughout maintenance procedure. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
TM 9-2330-202-13&P
0050
0050-1