TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 246 of 552

CLEANING AND INSPECTION - Continued

9.

Inspect channel for broken leaf spring (Figure 7, Item 1). If leaf spring (Figure 7, Item 1) is damaged, replace

hydraulic brake actuator assembly (Figure 7, Item 2).

1

2

M116_M101_094B

Figure 7.

Leaf Spring Inspection.

END OF TASK

ASSEMBLY

NOTE

For trailers with master cylinder cap, do Step 1. For trailers with drain hose, do

Steps 2 and 3.

1.

Install new gasket (Figure 8, Item 3) and cap (Figure 8, Item 2) on master cylinder (Figure 8, Item 1)

and finger-tighten.

2.

Install new gasket (Figure 8, Item 8), baffle (Figure 8, Item 9), filler cap (Figure 8, Item 4), and vent tube

(Figure 8, Item 5) on master cylinder (Figure 8, Item 1).

3.

Install drain hose (Figure 8, Item 7) on vent tube (Figure 8, Item 5) and tighten clamp (Figure 8, Item 6).