TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 249 of 552
INSTALLATION
1.
Install hydraulic brake actuator assembly (Figure 11, Item 1) on drawbar bracket assembly
(Figure 11, Item 10) with two new lockwashers (Figure 11, Item 8) and cap screws (Figure 11, Item 9). Torque
cap screws (Figure 11, Item 9) between 44 – 54 lb-ft (60 – 73 N•m). Install two cap screws
(Figure 11, Item 2), new lockwashers (Figure 11, Item 6), and nuts (Figure 11, Item 7) on drawbar bracket
assembly (Figure 11, Item 10). Torque nuts (Figure 11, Item 7) between 106 – 120 lb-ft (144 – 163 N•m).
2.
Position hydraulic brake actuator assembly (Figure 11, Item 1) with drawbar bracket assembly
(Figure 11, Item 10) at two drawbars (Figure 11, Item 4).
3.
Install four cap screws (Figure 11, Item 5) and new self-locking nuts (Figure 11, Item 3) on hydraulic brake
actuator assembly (Figure 11, Item 1), drawbar bracket assembly (Figure 11, Item 10), and two drawbars
(Figure 11, Item 4). Torque self-locking nuts (Figure 11, Item 3) between 44 – 54 lb-ft (60 – 73 N•m).
5
1
2
2
3
3
4
5
6
6
7
7
8
8
9
10
M116_M101_097
Figure 11.
Hydraulic Brake Actuator Assembly Installation.
TM 9-2330-202-13&P
0050
0050-13
Back to Top
