TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 241 of 552

DISASSEMBLY

1.

Remove self-locking nut (Figure 4, Item 7) and cap screw (Figure 4, Item 1) from channel

(Figure 4, Item 5). Discard self-locking nut (Figure 4, Item 7).

NOTE

On newer-model trailers, spacers are welded to inside of channel.

2.

Remove two self-locking nuts (Figure 4, Item 6), cap screws (Figure 4, Item 2), four spacers

(Figure 4, Item 3), and master cylinder (Figure 4, Item 4) from channel (Figure 4, Item 5). Discard self-locking

nuts (Figure 4, Item 6).

1

2

3

3

4

5

6

7

3

3

M116_M101_096A

Figure 4.

Master Cylinder Disassembly.

TM 9-2330-202-13&P

0050

0050-5