TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 220 of 552
INSTALLATION - Continued
3.
Feed handbrake cable assembly (Figure 6, Item 1) through backing plate (Figure 6, Item 3) and position at
lever (Figure 6, Item 4). Make sure lock tabs (Figure 6, Item 6) are spread and hold handbrake cable assembly
(Figure 6, Item 1) securely in backing plate (Figure 6, Item 3).
4.
Pull spring (Figure 6, Item 2) away from swaged sleeve (Figure 6, Item 5), and hook swaged sleeve
(Figure 6, Item 5) to lever (Figure 6, Item 4).
1
3
4
2
2
5
5
1
6
4
M116_M101_080
Figure 6.
Handbrake Cable Assembly Installation.
END OF TASK
FOLLOW ON TASK
1.
Install hub and brake drum (WP
0055).
2.
Bleed hydraulic brake system (WP
0053).
3.
Adjust service brakes (WP
0048).
4.
Adjust handbrakes (WP
0043).
END OF TASK
END OF WORK PACKAGE
TM 9-2330-202-13&P
0045
0045-10
Back to Top
