TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 278 of 552

REMOVAL

1.

Raise trailer with lifting device. Position a suitable support stand under axle. Lower and remove lifting device.

2.

Remove six cap screws (Figure 1, Item 1), lockwashers (Figure 1, Item 2), access cover (Figure 1, Item 3),

and paper gasket (Figure 1, Item 4). Discard lockwashers (Figure 1, Item 2) and paper gasket

(Figure 1, Item 4).

3.

Remove outer bearing sleeve nut (Figure 1, Item 5), adjusting nut (Figure 1, Item 6), key washer

(Figure 1, Item 7), outer bearing hub cone and roller (Figure 1, Item 8), and wheel hub and brake drum assembly

(Figure 1, Item 9).

1

2

3

4

5

6

7

8

9

M116_M101_4-90_1A

Figure 1.

Hub, Brake Drum, and Bearing Removal.

END OF TASK

DISASSEMBLY

1.

Remove retaining ring (Figure 2, Item 1), seal (Figure 2, Item 2), and inner bearing hub cone and roller

(Figure 2, Item 3). Discard seal (Figure 2, Item 2).

TM 9-2330-202-13&P

0055

0055-2