TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 274 of 552
INSTALLATION
1.
Lightly coat spindle (Figure 4, Item 8) with grease.
2.
Install hub (Figure 4, Item 7) and brake drum (Figure 4, Item 6), as an assembly, on spindle
(Figure 4, Item 8).
3.
Pack outer bearing (Figure 4, Item 5) with grease and install on spindle (Figure 4, Item 8).
NOTE
Configurations may vary. If trailer has castellated nuts, do Step 4. If trailer is equipped with
retainers and nuts, do Step 5.
4.
Install flat washer (Figure 4, Item 4) and castellated nut (Figure 4, Item 3) on spindle (Figure 4, Item 8).
5.
Install flat washer (Figure 4, Item 4), nut (Figure 4, Item 9), and retainer (Figure 4, Item 10) on spindle
(Figure 4, Item 8).
6.
Perform wheel bearing adjustment.
1
2
3
4
5
6
8
7
10
9
M116_M101_4-85C
Figure 4.
Hub, Brake Drum, and Wheel Bearing Replacement.
END OF TASK
TM 9-2330-202-13&P
0054
0054-6
Back to Top
