TM 9-2330-334-13&P
CIRCUIT BREAKER, MODULE,
0057 00
AND CONNECTOR REPLACEMENT - Continued
0057 00-9
Change 1
12 VDC CONNECTOR REMOVAL
NOTE
•
All 12 VDC connector wires are removed the same way.
•
Tag wires and connection points prior to disconnecting.
1.
Loosen screw (25) at position 1WHT on 12 VDC connector (16).
2.
Remove wire (26) from position 1 WHT on 12 VDC connector (16).
3.
Perform the previous two steps on remaining wires.
4.
Remove two nuts (27), lockwashers (28), bolts (29), and 12 VDC connector (16) from voltage converter
box cover (30). Discard lockwashers.