TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 430 of 1184

TM 9-2330-334-13&P

CIRCUIT BREAKER, MODULE,

0057 00

AND CONNECTOR REPLACEMENT - Continued

Change 1

0057 00-12

24 VDC CONNECTOR INSTALLATION

NOTE

All 24 VDC connector wires are installed the same way.

1.

Install 24 VDC connector (19) and cover (35) on voltage converter box cover (30) with four screws (34),

lockwashers (33), and nuts (32).

2.

Strip approximately 1/4 in. (0.6 cm) of insulation from wire (31).

3.

Solder wire (31) to ground pin on 24 VDC connector (19).

4.

Perform the previous two steps on remaining wires.