TM 9-2330-334-13&P
CIRCUIT BREAKER, MODULE,
0057 00
AND CONNECTOR REPLACEMENT - Continued
0057 00-11
Change 1
24 VDC CONNECTOR REMOVAL
NOTE
•
All 24 VDC connector wires are removed the same way.
•
Tag wires and connection points prior to disconnecting.
1.
Remove wire (31) from ground pin on 24 VDC connector (19).
2.
Perform the previous step on remaining wires.
3.
Remove four nuts (32), lockwashers (33), screws (34), cover (35), and 24 VDC connector (19) from
voltage converter box cover (30). Discard lockwashers.