TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 553 of 640
0096-11
TM 9-2330-335-14&P
0096
COMBINATION SPRING BRAKE INSTALLATION INSTRUCTIONS - CONTINUED
Attachment Guidelines
00096
When attaching a reinforcement plate to the brake mounting bracket face, the following guidelines must be followed:
1.
Attach .25 in. (6 mm) steel plate 7 in. x 7 in. (178 mm x 178 mm) square, to brake mounting bracket face. Secure
with
two 5/8 in. or M16 bolts, washers, and nuts, and torque to 50 lb-ft (67.5 Nm) (Figure 12).
Figure 12.
Sealed Brake.
096
2.
Weld reinforcement plate to brake mounting bracket (see Figure 13 for suggested weldment locations). For exact location
and weld size, refer to axle manufacturer’s guidelines. Allow welds to cool and remove bolts (Figure 13).
Figure 13.
Sealed Brake.
096
447-0229
447-0230
Back to Top
