TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 300 of 500
TRANSFER CONTAINER FROM TRAILER TO VEHICLE - Continued
1
3
2
4
Figure 23.
Transfer Container From Trailer To Vehicle With ECHU.
7.
Remove hitch pin (Figure 23, Item 1) from slider bracket (Figure 23, Item 3) and slider
(Figure 23, Item 4) and rotate slider bracket (Figure 23, Item 3) down.
8.
Install hitch pin (Figure 23, Item 1) through slider (Figure 23, Item 4) and slider bracket
(Figure 23, Item 3).
9.
Install safety pin (Figure 23, Item 2) in hitch pin (Figure 23, Item 1).
10.
Repeat Steps (6) through (9) for right side slider bracket.
11.
Start engine. Refer to vehicle Operator's manual (WP
0057).
12.
Apply service brake pedal. Refer to vehicle Operator's manual (WP
0057).
13.
Place transmission range selector to REVERSE. Refer to vehicle Operator's
manual (WP
0057).
14.
Release parking brake. Refer to vehicle Operator's manual (WP
0057).
WARNING
Driver has limited vision to rear. Ground guide is required when driving
vehicle in reverse. Failure to comply may result in injury or death to
personnel.
TM 9-2330-342-10
0027
0027-28
Back to Top
