TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 309 of 500
TRANSFER CONTAINER FROM TRAILER TO VEHICLE - Continued
1
2
3
4
Figure 31.
Transfer Container From Trailer To Vehicle With ECHU.
54.
Remove hitch pin (Figure 31, Item 1) from slider bracket (Figure 31, Item 3) and slider
(Figure 31, Item 4) and rotate slider bracket (Figure 31, Item 3) up.
55.
Install hitch pin (Figure 31, Item 1) through slider (Figure 31, Item 4) and slider bracket
(Figure 31, Item 3).
56.
Install safety pin (Figure 31, Item 2) in hitch pin (Figure 31, Item 1).
57.
Repeat Steps (53) through (56) for right side slider bracket.
58.
Secure twist locks and transport locks. Refer to TB 9-3950-253-13&P (WP
0057).
NOTE
Both ISO lock mount pins are installed the same way. Right side shown.
59.
Install hitch pin (Figure 32, Item 1) on ISO lock mount (Figure 32, Item 2).
TM 9-2330-342-10
0027
0027-37
Back to Top
