TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 305 of 500

TRANSFER CONTAINER FROM TRAILER TO VEHICLE - Continued

32.

Move joystick to LOAD position until container (Figure 26, Item 3) is raised

approximately 2 ft (610 mm). Refer to vehicle Operator's manual (WP

0057).

33.

Release joystick. Refer to vehicle Operator's manual (WP

0057).

34.

Remove crank handle (Figure 27, Item 1) from BII stowage box (Figure 27, Item 2).

1

2

8

3

4

5

6

7

Figure 27.

Transfer Container From Trailer To Vehicle With ECHU.

CAUTION

To minimize damage to ISO locks when they are stowed on ISO lock

bracket, ensure ISO lock hook does not move. Failure to comply may

result in damage to equipment.

NOTE

Both ISO locks are removed the same way. Right side shown.

35.

With the aid of a crank handle (Figure 27, Item 1), rotate ISO lock adjustment screw

(Figure 27, Item 4) clockwise until ISO lock hook (Figure 27, Item 3) does not move.

TM 9-2330-342-10

0027

0027-33