TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 306 of 500

TRANSFER CONTAINER FROM TRAILER TO VEHICLE - Continued

36.

Remove safety lock pin (Figure 27, Item 7) from ISO lock mount (Figure 27, Item 6).

37.

Remove hitch pin (Figure 27, Item 5) from ISO lock (Figure 27, Item 8) and ISO lock

mount (Figure 27, Item 6).

38.

Remove ISO lock (Figure 27, Item 8) from ISO lock mount (Figure 27, Item 6).

39.

Repeat Steps (35) through (38) for left side ISO lock.

40.

Stow crank handle (Figure 27, Item 1) in BII stowage box (Figure 27, Item 2).

41.

Turn hydraulic selector switch to AUTO position. Refer to vehicle Operator's manual

(WP

0057).

WARNING

Ensure all personnel are clear of the vehicle, trailer, and cart during LHS

operations. Failure to comply may result in serious injury or death to

personnel.

42.

Move joystick to LOAD position. Refer to vehicle Operator's manual (WP

0057).

43.

Continue to load container (Figure 28, Item 1) on vehicle until container (Figure 28,

Item 1) comes in contact with center section of slider (Figure 28, Item 4) but does not

lift cart (Figure 28, Item 2) from trailer (Figure 28, Item 3).

1

3

2

4

Figure 28.

Transfer Container From Trailer To Vehicle With ECHU.

44.

Release joystick. Refer to vehicle Operator's manual (WP

0057).

TM 9-2330-342-10

0027

0027-34