TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 301 of 500

TRANSFER CONTAINER FROM TRAILER TO VEHICLE - Continued

WARNING

Do not stand between trailer and vehicle during backing procedures.

Failure to comply may result in injury or death to personnel.

CAUTION

•

Vehicle must be aligned with trailer. Failure to comply may result

in damage to equipment.

•

Both of the bumper points must be under the vehicle bumper

plate flange and at least one of the bumper points must contact

the bumper plate. The bumper point not contacting the bumper

plate cannot exceed 0.5 in. (12.7 mm) in distance from bumper

plate or container will not load properly. Failure to comply may

result in damage to equipment.

15.

With the aid of an assistant, back up vehicle so that bumper attachment (Figure 24,

Item 3) is under bumper plate flange (Figure 24, Item 2) and is in contact with bumper

plate (Figure 24, Item 1). Refer to vehicle Operator's manual (WP

0057).

1

2

3

Figure 24.

Transfer Container From Trailer To Vehicle With ECHU.

16.

Apply service brake pedal. Refer to vehicle Operator's manual (WP

0057).

17.

Place transmission range selector to NEUTRAL. Refer to vehicle Operator's manual

(WP

0057).

TM 9-2330-342-10

0027

0027-29