TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 310 of 500
TRANSFER CONTAINER FROM TRAILER TO VEHICLE - Continued
1
2
3
Figure 32.
Transfer Container From Trailer To Vehicle With ECHU.
60.
Install safety lock pin (Figure 32, Item 3) on ISO lock mount (Figure 32, Item 2).
61.
Repeat Steps (59) and (60) for left side.
CAUTION
To minimize damage to ISO lock adjustment screw, install ISO lock facing
inboard. Failure to comply may result in damage to equipment.
NOTE
•
Both ISO locks are installed the same way. Inboard ISO lock
shown.
•
Install ISO locks as noted prior to removal.
62.
Install ISO lock (Figure 33, Item 3) on ISO lock bracket (Figure 33, Item 2) with gravity
lock hitch pin (Figure 33, Item 1).
TM 9-2330-342-10
0027
0027-38
Back to Top
