TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 477 of 1348
FRONT/SIDE LED MARKER LIGHT/BRACKET REPLACEMENT - Continued
BOTTOM VIEW
3
2
4
5
6
7
8
9
10
2
1
Figure 5.
Front/Side LED Marker Light/Bracket Installation.
2.
Install wire 1435 (Figure 5, Item 10) and wire 1435 (Figure 5, Item 8) on bracket (Figure 5, Item 2) with screw
(Figure 5, Item 9) and locknut (Figure 5, Item 7).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
3.
Apply RTV sealant to screw (Figure 5, Item 9), locknut (Figure 5, Item 7), wire 1435 (Figure 5, Item 8), wire
1435 (Figure 5, Item 10), and bracket (Figure 5, Item 2).
4.
Install reflector (Figure 6, Item 3) on bracket (Figure 6, Item 1) with two screws (Figure 6, Item 2) and locknuts
(Figure 6, Item 5).
TM 9-2330-342-23&P
0054
0054-5
Back to Top
