TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 581 of 1348
ALIGNMENT - Continued
4.
Tape plumb bob (Figure 3, Item 2) to Axle No. 1 (Figure 3, Item 1).
1
2
Figure 3.
Axle No. 2 Alignment.
5.
Hang plumb bob (Figure 3, Item 2) over center mark of Axle No. 1 (Figure 3, Item 1) and mark where it touches
floor.
NOTE
Steps (6) and (7) have plumb bob still positioned in center of Axle No. 1.
6.
Rotate turntable (Figure 4, Item 1) to left of center approximately 45 degrees and make a second mark where
plumb bob touches floor.
1
AXLE CENTER
Figure 4.
Axle No. 2 Alignment.
7.
Rotate turntable (Figure 4, Item 1) to right of center approximately 45 degrees and make a third mark where
plumb bob touches floor.
8.
Remove plumb bob from Axle No. 1.
TM 9-2330-342-23&P
0062
0062-3
Back to Top
