TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 879 of 1348
CLEANING/INSPECTION - Continued
4.
Clean inside of drawbar structure with solvent cleaning compound (WP
0193, Table 1, Item 13, 14, 15, 16,
17, 18) and dry with compressed air.
END OF TASK
ASSEMBLY
1.
Install four bushings (Figure 11, Item 1) on drawbar structure (Figure 11, Item 2).
1
1
JACKSTAND
2
Figure 11.
Drawbar Assembly.
2.
Using bushing driver, install two bushings (Figure 12, Item 3) in drawbar structure (Figure 12, Item 1) until fully
seated.
1
2
3
TOOL
4
3
2
JACKSTAND
Figure 12.
Drawbar Assembly.
3.
Apply grease to two wiper seals (Figure 12, Item 2).
NOTE
•
Wiper seals seat in groove.
•
Lips of wiper seals must face out.
TM 9-2330-342-23&P
0103
0103-9
Back to Top
